shielded contacts b-20 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2012 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com b m39029/78 852-010 size 16 coaxial socket size #16 coaxial socket contacts for mil-dtl-38999 series ii connectors d38999 series ii these #16 socket contacts accept 50 ohm and 75 ohm coaxial cable. inner contact is rated at 1 amp, the outer contact 12 amps. dwv rating is 800 vac rms sea level, 250 vac at 50,000 feet. contacts are packaged individually and are unassembled with instruction sheet. one contact consists of outer contact , fuorocarbon dielectric, inner contact and shield crimp sleeve. inner and outer contacts are gold-plated copper alloy. approved to sae as39029. vswr rating 1.5:1 maximum up to 700 mhz. 5000 megohm insulation resistance. mates with: m39029/76. material and finish contact body: copper alloy/gold plated hood: stainless steel/passivated center contact: copper alloy/gold plated crimp sleeve: copper alloy/gold plated insulator: tefon * indicates point at which a square ended pin of the same basic diameter as the mating contact frst engages the outer contact spring shield crimp sleeve ?j k ?h inner pin contact u n p r t 47/43 32 spherical radius s ?m ?l ?v ?w .020 .013 thru one wall only radial location optional r shield crimp sleeve r .003 max outer contact barrel inner pin contact bin color bands (see table) ?f ?e x * .560 min .248 min r .002 min outer contact mates with .0635/.0615 pin .063 min .033 .029 .289 .279 47 43 ?z ?d ?c ?b ?a max .166 min depth ?g after crimp
shielded contacts b-21 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2012 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com b m39029/78 852-010 size 16 coaxial socket type cable accommodation part number military part number color band 1st 2nd 3rd socket m17/119-rg174, m17/113-rg316, m17/094-rg179, times aa3248, teledyne 11299, haveg 8100207, thermax 75-738-bccwxe, tensolite 3088/l707yx-1 852-010-16-432 m39029/78-432 yellow orange red m17/093-rg178 852-010-16-433 m39029/78-433 yellow orange orange haveg 61-02051, revere wh95623 852-010-16-434 m39029/78-434 yellow orange yellow haveg 30-00761, haveg 30-02024, haveg 30-02033, tensolite 24713/a955kk1, tensolite 26723/a955k1 852-010-16-435 m39029/78-435 yellow orange green table i bin code ?a max ?b ?c ?d min ?e ?f ?g max ?h min ?j max k ?l min 432 .113 (2.9) .068 (1.73) .065 (1.65) .089 (2.3) .084 (2.1) .670 (17.0) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .108 (2.7) .105 (2.7) .120 (3.0) .105 (2.7) .095 (2.4) .0210 (0.5) 433 .113 (2.9) .068 (1.73) .065 (1.65) .089 (2.3) .084 (2.1) 0.575 (14.6) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .108 (2.7) .094 (2.4) .120 (3.0) .105 (2.7) .095 (2.4) .0210 (0.5) 434 .113 (2.9) .068 (1.73) .065 (1.65) .089 (2.3) .084 (2.1) .670 (17.0) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .108 (2.7) .105 (2.7) .120 (3.0) .105 (2.7) .095 (2.4) .0355 (0.9) 435 .113 (2.9) .068 (1.73) .065 (1.65) .089 (2.3) .084 (2.1) 0.575 (14.6) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .108 (2.7) .094 (2.4) .120 (3.0) .105 (2.7) .095 (2.4) .0270 (0.7) table i (continued) bin code ?m max n min p r s t u ref ?v ?w x ?z max 432 .046 (1.2) .103 (2.6) .094 (2.4) .087 (2.2) .125 (3.2) .119 (3.0) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .3895 (9.9) .0155 (.39) .0145 (.37) .030 (0.8) .028 (0.7) .274 (7.0) .264 (6.7) .085 (2.2) 433 .046 (1.2) .103 (2.6) .094 (2.4) .087 (2.2) .125 (3.2) .119 (3.0) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .3895 (9.9) .0155 (.39) .0145 (.37) .030 (0.8) .028 (0.7) .274 (7.0) .264 (6.7) .076 (1.9) 434 0.052 (1.3) .103 (2.6) .094 (2.4) .087 (2.2) .125 (3.2) .119 (3.0) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .3895 (9.9) .0155 (.39) .0145 (.37) .030 (0.8) .028 (0.7) .274 (7.0) .264 (6.7) .085 (2.2) 435 .046 (1.2) .103 (2.6) .094 (2.4) .087 (2.2) .125 (3.2) .119 (3.0) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .3895 (9.9) .0155 (.39) .0145 (.37) .030 (0.8) .028 (0.7) .274 (7.0) .264 (6.7) .076 (1.9) table iii inner contact outer contact insertion tool extraction tool basic crimping tool positioner basic crimping tool positioner m22520/2-01 m22520/2-35 m22520/4-01 m22520/4-02 m81969/8-07 or m81969/14-03 m81969/8-08 or m81969/14-03
|
